Evidence record · UDINUS · SDGs
- Unit
- Rektorat UDINUS
- Period
- 2020
- Goals
- Record
- 5103aee8-6b4a-4360-adbb-f560a8ccbaa7
- Published
- 2026-10-30
Universitas Dian Nuswantoro conducted an activity concerning the manufacture and evaluation of teak leaf waste/polyurethane composites for particleboard application. The activity involved Masturi, Jannah, W.N., Maulana, R.M., Darsono, T., Sunarno, T., and Rustad, S. as participants. Polyurethane was used as the matrix, and variations were performed in its fraction within the range of 0.04–0.20 (w/w). The resulting composites were tested for mechanical and physical properties.
The test results showed that the highest compressive strength reached 38.5 MPa at a polyurethane fraction of 0.14 (w/w). The composite density was 1261 kg m−3 and was reported to be in accordance with the density result for teak. Physical properties were also investigated, including water absorption. The lowest water absorption value was 1.38%. Based on these findings, the produced composites were indicated as potentially capable of replacing wood raw material in eco-friendly industrial-scale applications.
In relation to SDG 9, the activity addresses research and innovation connected with composite materials and particleboard application. It documents the use of teak leaf waste and polyurethane in a tested composite and reports mechanical and physical property results relevant to the stated application. The activity therefore provides evidence of UDINUS engagement in research concerning materials, product application, and an indicated environmentally friendly industrial-scale possibility. Further technical details about the testing procedures, specimen preparation, and implementation of the proposed application are not provided in the source.