Skip to content
SDGs Center UDINUS

Evidence record · UDINUS · SDGs

Effect of Quartz Sand on Compressive Strength of the Solid Waste Composite

Rektorat UDINUS 2016 Published 2026-10-30

Evidence record · UDINUS · SDGs

Unit
Rektorat UDINUS
Period
2016
Goals
Record
80ce03f6-6b86-4930-b90c-2c378d45a106
Published
2026-10-30

Universitas Dian Nuswantoro conducted an activity on the effect of quartz sand on the compressive strength of a solid waste composite in 2016. The activity involved Masturi, Putut Marwoto, Sunarno, and Supriadi Rustad as participants. It addressed a solid waste composite and its potential relationship to building materials within the framing of SDG 11, Sustainable cities and communities.

The composite was successfully made. The initial synthesis used polyurethane, identified as PU, as a binder mixed with solid waste through a simple mixing method. The resulting mixture was hot-pressed at a pressure of 4 metric-tons and a temperature of 80°C for 20 minutes. To enhance the strength of the PU-solid waste mixture, quartz sand particles with varied content were added. The activity therefore examined the compressive strength of the composite in relation to the PU fraction and the addition of quartz sand.

Compressive strength testing showed that the PU-solid waste composite with a PU fraction of 0.43 by weight had an optimum compressive strength of 38.91 MPa. When quartz sand with an average particle size of 0.94 μm was added, the compressive strength reached a maximum of 40.47 MPa at a quartz sand fraction of 4.27 × 10-3 by weight. These findings describe the measured strength of the composite under the stated preparation and testing conditions.

The reported strength was comparable to that of clay brick, slate stone, sandstone, limestone, alder wood, aspen wood, black cherry, and pine wood. The source consequently states that the composite was adequate to compete with building materials such as bricks, stones, and woods. In the SDG 11 context, this activity provides source-based evidence concerning the preparation and compressive-strength assessment of a solid waste composite considered for building-material applications. The activity is presented as institutional evidence from Universitas Dian Nuswantoro, with the stated methods, measurements, comparisons, and conclusion retained without adding information beyond the source.

Reference https://www.scopus.com/pages/publications/84984535316?origin=resultslist